Disassembly and Reassembly
Service Manual
3-5
Samsung Electronics
3.3.2 Screws used in the printer
The screws listed in the table below are used in this printer. Please ensure that, when you disassemble the
printer, you keep a note of which screw is used for which part and that, when reassembling the printer, the
correct screws are used in the appropriate places.
Sec_Code Location Description Qty
6001-000130
MAIN DRIVE
SCREW-MACHINE;BH,+,M3,L6,ZPC(WHT),SWRCH18A,-,- 1
6002-000440 SCREW-TAPPING;PWH,+,-,2,M3,L8,ZPC(BLK),SWRCH18A,- 21
6003-000301 SCREW-TAPTITE;BH,+,-,S,M4,L6,ZPC(WHT),SWRCH18A,- 1
6003-000196
FUSER
SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 7
6003-000282 SCREW-TAPTITE;BH,+,-,B,M3,L8,ZPC(BLK),SWRCH18A,- 2
6003-000282 LSU SCREW-TAPTITE;BH,+,-,B,M3,L8,ZPC(BLK),SWRCH18A,- 10
6003-000282 LSU LD UNIT SCREW-TAPTITE;BH,+,-,B,M3,L8,ZPC(BLK),SWRCH18A,- 2
6003-000282 IMAGING UNIT SCREW-TAPTITE;BH,+,-,B,M3,L8,ZPC(BLK),SWRCH18A,- 10
6003-000282 CARTRIDGE-TRANSFER SCREW-TAPTITE;BH,+,-,B,M3,L8,ZPC(BLK),SWRCH18A,- 12
6003-000196
COVER PLATEN ASSY + COVER-UPPER F/R
SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 2
6003-000196 STANDARD ADF + COVER PLATEN ASSY SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 2
6003-000196 COVER UPPER + GUIDE PATH LOWER SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 4
6003-000196
GUIDE PATH LOWER + FRAME GUIDE PATH
SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 4
6003-000196 MOTOR ASSY + GUIDE PATH LOWER SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 2
6003-000269 ELA HOU-ADF MOTOR SCREW-TAPTITE;BH,+,-,S,M3,L6,ZPC(WHT),SWRCH18A,- 2
6003-000196
FRAME-GUIDE PATH + BRACKET-PATH LOWER
SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 2
6003-000196 COVER-PLATEN + HINGE SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 4
6003-000196 COVER-SCAN UPPER TOP SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 2
6003-000196 ELA UNIT-SCAN LOWER SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 8
6003-000196 ELA UNIT-STANDARD SCAN SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 3
6003-000269 ELA UNIT-SCAN DRIVE SCREW-TAPTITE;BH,+,-,S,M3,L6,ZPC(WHT),SWRCH18A,- 2
6003-000196 ELA UNIT-OPE SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 4
6003-000196 ADF BOARD SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 2
6003-000196 COVER-HARNESS SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 4
6003-000196 COVER-HARNESS(LSU) SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 3
6003-000196 COVER-MIDDLE SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 4
6003-000196 COVER-RIGHT SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 1
6003-000196 DRIVE SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 7
6003-000196 FUSER SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 4
6003-000196 HOUSING-HARNESS SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 1
6003-000196 HVPS SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 5
6003-000196 LSU SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 3
6003-000196 SHIELD-MAIN LOWER SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 4
To Next Page
Loading...
