Samsung CLX-3175N/XAZ - 3.4 Disassembly Procedure

Disassembly and Reassembly
Service Manual
3-8
Samsung Electronics
3.4 Disassembly Procedure
The description of disassembly and reassembly in this manual is listed according to the disassembly
procedures. If you  nd the certain unit or Assy, please consult the name of unit under the picture.
3.4.1 Cover
Before disassembling,
Remove the CMYK toner, Toner waste tank, and Drum unit.
1. Remove the one screw from the rear of SET.
2. Remove the right side cover by unhooking after
open the front cover.
3. Remove the left side cover. And open and
remove the rear cover.
4. Open the front cover. Unplug the connector after
remove the connector cover. And then remove
the front cover.