Samsung CLX-6250FX - Fuser Control Board Disassembly; LSU Disassembly

Disassembly and Reassembly
Service Manual
3-17
Samsung Electronics
3.3.9 Fuser Control Board
- Before disassembling the Fuser control board, remove the rear cover and cover-middle rear (Refer to 3.3.1.3)
1. Unplug the harness from the Fuser control board.
2. Remove 4 screws and release the Fuser control board.
3.3.10 LSU
- Before disassembling the LSU, remove the Main board / SMPS board / Fuser control board.
1. To remove the Bracket main & Duct, remove the
9 screws and release it.
2. Remove the 4 screws and remove the LSU Unit.