Copying_ 51
Advanced tab
You can move to next or previous page using up/down arrows at the bottom
left.
• Original Size: Selects the actual paper size of the originals (see
"Selecting the size of originals" on page 61).
• Original Orientation: Selects the orientation of the originals (see
"Selecting the orientation of originals" on page 61).
• ID Copy: Prints 2-sided originals on one sheet of paper. This feature is
helpful for copying a small-sized item, such as a business card (see
"ID
card copying" on page 62).
• N-Up: Prints 2 or more original images, reduced to fit onto one sheet of
paper (see
"N-up copying" on page 63).
• Image Repeat: Prints multiple image copies from the original document
on a single page (see
"Image Repeat" on page 66).
• Back: Returns to the Basic tab.
• Image Shift: Allows you to adjust the image’s position (see "Image shift
copying" on page 66).
• Booklet: Allows you to create booklets (see "Booklet copying" on
page 68).
• Book Copy: Allows you to copy the left or/and right pages of book on
separate output paper (see
"Book copying" on page 69).
• Covers: Automatically adds covers taken from a different tray (see
"Cover copying" on page 70).
• Transparency: Adds a blank or printed separator between
transparencies within a set (see
"Transparency copying" on page 70).
• Back: Returns to the Basic tab.
• Watermark: Allows you to print a watermark on printouts (see
"Watermark" on page 71).
• Overlay: Allows you to use a overlay to apply to copy outputs (see
"Overlay" on page 71).
• Stamp: Allows you to print with some information (see "Stamp" on
page 72).
• Poster Copy: Prints an image divided into 9 pages (see "Poster
copying" on page 73).
• Duplex Scan Speed: Speed up the copy scanning (see "Selecting
duplex scan speed" on page 73).
• Job Completion Notification: Sends an email notification after the
copy job is completed (see
"Setting job completion notification" on
page 74).
• Back: Returns to the Basic tab.
• Build Job: Allows you to copy several pages or different types of
originals after all originals are scanned (see
"Build job" on page 74).
• Back: Returns to the Basic tab.
Image tab
You can move to next or previous page using up/down arrows on the
bottom left.
• Original Type: Improves the copy quality by selecting the original’s
type for the current copy job (see
"Selecting the type of originals" on
page 74).
• Erase Edge: Allows you to erase specified areas of copies (see
"Erasing edges" on page 75).
• Sharpness: Adjusts the sharpness level to make a copy that is easier
to read (see
"Changing the sharpness" on page 75).
• Contrast: Adjusts the contrast level to make the image either soft or
crisp (see
"Changing the contrast" on page 76).
• Mirror: Reverses the original image like a mirror (see "Copying in a
mirror image" on page 76).
• Back: Returns to the Basic tab.
• Adjust Background: Prints an image with a lighter background.(see
"Adjusting background" on page 77).
• Erase Backside Image: Prevents copying the original’s image shown
through on the backside (see
"Erasing backside Images" on page 77).
• Negative Image: Allows you to copy the original image with the light-
and dark-colored areas of the image inversed (see
"Copying in a
negative image" on page 78).
• Back: Returns to the Basic tab.
To Next Page
Loading...
