To Next PageTo Next PageWhat to do if my Samsung Microwave Oven shows Gas Sensor Error E-14?
If your Samsung Microwave Oven displays a Gas Sensor Error E-14, the suggested solution is to insert food into the oven and restart it.
What to do if my Samsung Microwave Oven shows Gas Sensor Error E-11?
If your Samsung Microwave Oven displays a Gas Sensor Error E-11, the suggested solution is to check the sensor part and the connection of the sensor housing and the PCB’s connector.
Why Samsung Microwave Oven stirrer does not rotate?
If the drive motor in your Samsung Microwave Oven isn't working (the Ass’y stirrer doesn't rotate), it could be due to an open or loose wiring of the turntable motor, a defective turntable motor, or a defective ass’y stirrer. Check the wire of the drive motor. Replace the drive motor or the ass’y stirrer.
Why Samsung Microwave Oven does not accept key input?
If your Samsung Microwave Oven does not accept key inputs for programming (CM1929/1629/1329 models), it could be because the key input is not in sequence, there's an open or loose connection of the membrane keypad to the Ass’y PCB, the membrane panel is shorted or open, or the Ass’y PCB is defective. Refer to the operation procedure and replace the PCB main.
What to do if Samsung CM1519A-1 Microwave Oven timer counts down but no heat?
If your Samsung Microwave Oven's timer starts counting down but there's no microwave oscillation (no heat, but the oven lamp and fan motor turn on), it could be due to an open or loose connection in the high voltage circuit, especially the magnetron filament circuit, or defective high voltage components like the H.V. Transformer, H.V. Capacitor, H.V. Diode, H.V. Fuse, or Magnetron. Adjust the door and latch switches. Check the high voltage components according to the component test procedure and replace them if defective.
General| Brand | Samsung |
|---|---|
| Model | CM1519A-1 |
| Category | Microwave Oven |
| Language | English |
