Samsung CM1619 User Manual (English)

Other manuals for Samsung CM1619

Owner's Instructions And Cooking Guide16 pages

Questions and Answers:

M
Michael BaileySep 6, 2025
What to do if my Samsung CM1619 Microwave Oven shows E3 error?
- J
  James JonesSep 6, 2025
  If your Samsung Microwave Oven displays error code E3, it could be due to overheating inside the cavity because there's no load or too little load. Try plugging the power cord in again. Also, check for any blockages around the air exhaust area or ventilation openings. If the error persists, check the resistance of the Thermistor sensor and replace it if defective. The ventilation motor might be failing and causing the magnetron to overheat; replace the motor if necessary.
N
Nicole RomeroAug 25, 2025
What to do if Samsung CM1619 Microwave Oven timer counts down but no heat?
- R
  Ronald GutierrezAug 25, 2025
  If your Samsung Microwave Oven's timer starts counting down but there's no microwave oscillation (no heat, but the oven lamp and fan motor turn on), it could be due to an open or loose connection in the high voltage circuit, especially the magnetron filament circuit, or defective high voltage components like the H.V. Transformer, H.V. Capacitor, H.V. Diode, H.V. Fuse, or Magnetron. Adjust the door and latch switches. Check the high voltage components according to the component test procedure and replace them if defective.
C
Chelsea PopeAug 25, 2025
Why Samsung CM1619 Microwave Oven does not accept key input?
- J
  jdixonAug 26, 2025
  If your Samsung Microwave Oven does not accept key inputs for programming (CM1929/1629/1329 models), it could be because the key input is not in sequence, there's an open or loose connection of the membrane keypad to the Ass’y PCB, the membrane panel is shorted or open, or the Ass’y PCB is defective. Refer to the operation procedure and replace the PCB main.
K
Kevin GomezAug 27, 2025
Why Samsung Microwave Oven stirrer does not rotate?
- S
  stephen05Aug 27, 2025
  If the drive motor in your Samsung Microwave Oven isn't working (the Ass’y stirrer doesn't rotate), it could be due to an open or loose wiring of the turntable motor, a defective turntable motor, or a defective ass’y stirrer. Check the wire of the drive motor. Replace the drive motor or the ass’y stirrer.
M
Marcus AlvarezAug 27, 2025
What to do if my Samsung Microwave Oven shows Gas Sensor Error E-11?
- L
  lnicholsAug 27, 2025
  If your Samsung Microwave Oven displays a Gas Sensor Error E-11, the suggested solution is to check the sensor part and the connection of the sensor housing and the PCB’s connector.
J
John SchroederAug 28, 2025
What to do if my Samsung CM1619 Microwave Oven shows Gas Sensor Error E-14?
- W
  Whitney MillerAug 28, 2025
  If your Samsung Microwave Oven displays a Gas Sensor Error E-14, the suggested solution is to insert food into the oven and restart it.
Z
zfrancisSep 12, 2025
Why is my Samsung Microwave Oven completely dead?
- A
  Alisha WilsonSep 12, 2025
  If your Samsung Microwave Oven is completely dead, with no display or operation, even though the fuse is okay, it could be due to an open or loose lead wire harness, an open thermal cutout (Magnetron, cavity), an open low voltage transformer, or a defective Ass’y PCB. Check the fan motor when the thermal cutout is defective. Check Ass’y PCB when L.V.T is defective.
J
Julia GonzalesSep 7, 2025
Why is my Samsung CM1619 taking longer to cook food?
- K
  Kimberly RobinsonSep 7, 2025
  If your Samsung Microwave Oven is not heating food properly, and the cooking time is longer than usual, it could be due to several reasons. The power source voltage might be decreased. Check for open or loose wiring in the magnetron filament circuit. The magnetron itself might be aging, or there could be defective high voltage components such as the H.V. Transformer, H.V. Capacitor, H.V. Diode, H.V. Fuse, or the Magnetron. Consult an electrician and check the high voltage components; replace them if defective.
D
Dana LeonSep 5, 2025
What to do if my Samsung CM1619 displays Temp. Sensor Error: E-25?
- R
  Ryan SmithSep 5, 2025
  If your Samsung Microwave Oven displays a Temp. Sensor Error E-25, cool down the set and restart it.
K
Kevin BaileySep 2, 2025
What to do if my Samsung CM1619 displays Temp. Sensor Error: E-21?
- A
  Andrea JohnsonSep 2, 2025
  If your Samsung Microwave Oven displays a Temp. Sensor Error E-21, check the sensor part and the connection of the sensor housing and PCB’s connector.