39
ENG
Easy functions of remote control
Buttons Feature
PIP ON Used to activate or deactivate the PIP function directly.
STILL Used to freeze the sub picture.
SWAP Used to interchange the main picture and the sub picture.
➣
When the main picture is in the Video mode and the
sub picture is in the TV mode, you might not hear the
sound of main picture when pressing the
SWAP ( ) button after changing the sub picture
channel. At this time, reselect the channel of main
picture.
TV/VIDEO Used to assign a source of sub picture (TV, AV1, AV2 or
S-VIDEO).
SIZE Used to select a size of sub picture (Small or Large ).
POSITION Used to move the sub picture counterclockwise.
P/ Used to select the channel of sub picture.
Viewing the Picture In Picture (PIP) (depending on the model) (continued)
AA68-03418A-00Eng_UMG_TM76 6/2/04 11:49 AM Page 39
To Next Page
Loading...
