English 19
Technical data
Technical data
Technical data
Appliance dimensions
Width 288 mm
Depth 505 mm
Height 50 mm
Worktop cut - out
dimensions
Width 273 mm
Depth 490 mm
Corner radius 3 mm
Connection voltage 230 V - 50 Hz
Maximum connected load power 2.98 kW
Weight
Net 4.3 kg
Gross 6.0 kg
Cooking zones
Position Diameter Power
Front 148 mm 1190 W
Rear 183 mm 1790 W
Service
Before calling for assistance or service, please check the section FAQs and
troubleshooting on page 18.
If you still need help, follow the instructions below.
Is it a technical fault?
If so, please contact your customer service centre.
Always prepare in advance for the discussion. This will ease the process of
diagnosing the problem and also make it easier to decide if a customer service
visit is necessary.
Please take note of the following information.
• What form does the problem take?
• Under what circumstances does the problem occur?
When calling, please know the model and serial number of your appliance. This
information is provided on the rating plate as follows:
• Model description
• S / N code (15 digits)
When do you incur costs even during the warranty period?
• If you could have remedied the problem yourself by applying one of the
solutions provided in the section FAQs and troubleshooting on page 18.
• If the customer service technician has to make several service calls because he
was not provided with all of the relevant information before his visit and as a
result, for example, has to make additional trips for parts. Preparing for your
phone call as described above will save you the cost of these trips.
CTR432NB02_XSP_DG68-00315C-00_EN.indd 19 2017-07-24 6:00:36
To Next Page
Loading...
