17
EN
9/ THE DISHWASHER’S SAFETY SYSTEMS
• Door not closed properly
The screen flashes when the door is not closed or not properly closed.
• Locked programme access
While the programme is running, the programme selection switch is automatically locked and can-
not be changed. It will unlock automatically when the programme ends or is cancelled.
• Anti-overflow system
This system automatically activates the drain pump if the water level in the tub reaches an abnor-
mal height.
• Anti-leak system
This system interrupts the water supply if a leak is detected under the appliance.
Note:
To unlock, press the Start/Cancel button and hold it down for three seconds.
To Next Page
Loading...
