Samsung DC43H

87
Screen Burn Protection
Timer
Immediate display
Side Grey
Pixel Shift Off
Off
Off
Off
– The displayed image may differ depending on the model.
Timer
You can set the timer for Screen Burn Protection.
The Screen Burn Protection feature stops automatically after a specified period of time.
Timer
• Off
• Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals (Period).
• Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start
Time to End Time).
―
The option is enabled only when Clock Set is configured.
―
Mode, Period, Time, Start Time and End Time are enabled only when Timer is set to Repeat or Interval.
• Mode: Select a screen protective pattern to display.
– Pixel: Pixels on the screen alternate black continuously.
– Rolling bar: A vertical bar moves left to right.
– Fading screen: The entire screen becomes brighter, then darker.
―
The Rolling bar and Fading screen patterns appear only once regardless of the specified repeat period or
time.
• Period: Specify the time interval to activate the Screen Burn Protection function.
– 1 hour ~ 10 hour
―
The option is enabled when Repeat is selected for Timer.
• Time: Specify the duration to keep the Screen Burn Protection function on.
– 10 Sec ~ 50 Sec
―
Enabled when Timer is set to Repeat and Mode is set to Pixel.
• Start Time: Set the start time to activate the screen protection function.
―
The option is enabled when Interval is selected for Timer.
• End Time: Set the end time to deactivate the screen protection function.
―
The option is enabled when Interval is selected for Timer.