Samsung DC43H

103
DVI Connection
MENU m → System → DVI Connection → ENTER E
System
DVI Connection
Auto
– The displayed image may differ depending on the model.
Select the source device that is connected to the DVI input.
• Auto / PC / DVI
Clone Product
MENU m → System → Clone Product → ENTER E
Clone Product
Clone from USB
Clone to USB
– The displayed image may differ depending on the model.
Export the product settings to a USB device or load the settings via a USB device.
This option is useful when assigning the same settings to several products.
• Clone to USB: Copy the product settings to a USB device.
• Clone from USB: Assign the settings saved in a USB device to the product.
– After configuration is complete, the product is rebooted automatically.
―
The option may not work properly if the USB device contains a file other than a settings file.
―
Confirm that the USB device functions properly before running the option.
―
The option is available for products with the same Model Code and Software Version.
Go to Support → Contact Samsung and find the product Model Code and Software Version.