– 15 –
Voice Announce Mode
When another extension calls you, your keyset will sound a brief at-
tention tone and you will hear the caller's announcement.
1. Press the
ANS/RLS
key to turn on the microphone and speak
hands-free.
OR
Lift the handset to reply.
2. To finish the call, replace the handset or press the
ANS/RLS
key.
Note: To set Voice Announce mode, see Customising Your Keyset.
Auto Answer Mode
When another extension calls you, your keyset will sound a brief
attention tone and then automatically answer the call.
1. Your microphone and speaker are turned on and you can speak
hands-free. For privacy, use the handset.
2. To finish the call, replace the handset or press the
ANS/RLS
key.
Note: To set Auto Answer mode, see Customising Your Keyset.
Busy Extension Callback
When you call another extension and receive a busy signal:
1. Press the
CALLBACK
key or dial 44.
When the busy extension becomes free, your keyset will ring.
2. Lift the handset or press the
ANS/RLS
key to call the now idle
extension.
Note:
• A callback will be cancelled if not answered within 30 seconds. If you have set
a callback, your
CALLBACK
key will light.
• If the Hot Keypad feature has been turned off, you must first lift the handset or
press the
SPEAKER
key before dialling.
To Next Page
Loading...
