INSTALLATION
3
24 | SAMSUNG
Operation of the Remote Controller (Cont.)
3-1-2. Name and function of each part for the wireless remote controller
Cassette Type
• Start and stop of operation.
- To toggle the operation On and Off.
• When making the reservation.
- The reservation time can be set or canceled when pushing the Timer Set/ Cancel button
after adjusting the reservation time with On Timer or Off Timer.
• To increase (
…
) or decrease (
†
) the desired temperature.
• One cycle or continuous operation is available.
• To increase the On reservation time.
• One cycle or continuous operation is available.
• To increase the Off reservation time.
• One cycle or continuous operation is available.
• To rotate in the order of Auto
→
Cooling
→
Dehumidifying
→
Blowing
→
Heating.
• When the filter sign display starts to show the replacement time of filter of indoor unit,
pressing the key after cleaning the filter resets the filter sign.
• The wind mode to rotate in the order of wind select button, Breeze
→
Weak
→
Strong
→
Wind auto
→
Breeze.
• The blades are moving between up and down. (In case of Cassette model)
• To cancel the reservation setting (In case of Duct model).
On/OFF & Timer
Set/Cancel
Temperature adjustment
(
…
,
†
)
On Timer
Off Timer
Mode
Filter Reset
Fan Speed
Swing button
(Timer Cancel)
BUTTON NAME FUNCTION
<When doing the test operation with wireless remote controller...>
1. Remove both batteries from the wireless remote controller.
2. At the state of simultaneous pressing of On Timer key and Off Timer key, insert the batteries in the wireless remote controller.
3. When the wireless remote controller is on the TEST MODE, press On/Off key to make the SET for the Test operation.
Operating mode
Temperature setting
Fan speed
Air flow direction
On Timer setting
Off Timer setting
Battery discharge indicator
Mode selection button
Temperature adjustment buttons
Filter Reset button
Fan speed adjustment button
Swing button
On Timer button
Off Timer button
On/Off & Timer Set/Cancel button
There is no test key separately assigned to the wireless remote controller.
To Next Page
Loading...
