24
33.. FFiirrmmwwaarree UUppddaattee
1) Firmware version check method
a. Turn the power on, at the same time pressing LCD button of camera, MENU button and
OK button.
b. Firmware version will display on TFT LCD.
Version : 1.14
2) Firmware upgrade method
a. Download the newest Firmware to SD card..
b. If you insert SD card to camera and turn the power on, red LED will on.
c. Firmware will update automatically and after 2∼3 minutes, camera will be OFF
automatically with beep sound. (In case of lots of change Data, it may take over 5 minutes.)
d. Check the normal update of Firmware.
44.. AAddjjuussttmmeenntt mmeetthhoodd ffoorr eeaacchh iitteemm..
1) Focus adjustment
a. Set up a camera like below picture.(Download a Focus chart from ssa.net)
b. Watching TV monitor, adjust
a camera's image to be
cleared by turning Lens.
c. When the best condition of
adjusted image, bond a Lens.
ⅣⅣ.. AADDJJUUSSTT MMEENNTT
To Next Page
Loading...
