41
Effect
By using the camera’s digital processor, it is possible to add special effects to your images.
[ PROGRAM mode ]
[ MOVIE CLIP mode ]
NORMAL : No effect is added to the image.
B & W : Converts the image to black and white.
SEPIA : Captured images will be stored in a sepia tone
(a gradient of yellowish brown colours).
RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the
images to be captured.
Setting RGB Values
1. Select the [RGB] sub menu and then press the OK
button. The RGB menu bar will appear as shown.
2. Use the UP/ DOWN/ LEFT and RIGHT buttons to select
the desired RGB value.
- UP/ DOWN Button: Navigates between R, G, and B
icons.
- LEFT/ RIGHT Button: Changes value of each icon.
3. When you press the OK button, the value you set will be
saved and RGB setup mode will end.
EXIT:SH1 SET:OK
2048
EFFECT
NORMAL
B&W
SEPIA
RGB
NOR
2048
EFFECT
NORMAL
B&W
SEPIA
RGB
PRESS OK
2048
EFFECT
NORMAL
B&W
SEPIA
RGB
NOR
FPS
15
320
To Next Page
Loading...
