Samsung DIGIMAX A400 - Start up Sound

80
Start up sound
Setting the Startup Sound
1. In any mode with the exception of Voice Recording
mode, press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [S.BEEP] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [OFF] is selected : Start up sound will not be activated whenever the camera is turned on.
If [ON] is selected : Start up sound will be activated whenever the camera is turned on.
5. Press the menu button twice and the menu will disappear.
You can select the sound that is activated whenever the camera is turned on.
2048

MYCAM
S.IMAGE
S.BEEP
OFF
ON
SET:OK
BACK:
