《17》
Inserting the memory card
1. Turn the power off using the power button.
Open the battery chamber cover and press the memory card as
shown in the image and release.
2. Remove the memory card and close the battery chamber cover.
3. To close, push the battery chamber cover until you hear a click.
If the memory card does not slide in smoothly, do not attempt to
insert it by force. Check the direction of insertion, and then insert
it correctly. Do not insert the memory card the wrong way round.
Doing so may damage the memory card slot.
2. Have the front of the memory card facing toward the back of the
camera (LCD monitor) and the card pins toward the front of the
camera (lens), and then push the memory card into the card slot
until you hear a click.
1. Turn off the camera’s power and pull the battery chamber cover
in the direction of the arrow to open.
Removing the memory card
To Next Page
Loading...
