Samsung Digimax A502 - ZOOM W;T button

《24》
ZOOM W/T button
● TELE Zoom
Digital zoom TELE : Pressing the ZOOM T button activates the digital zoom software.
Releasing ZOOM T button stops the digital zooming at the required
setting. Once the maximum digital zoom (5X) is achieved, pressing
the ZOOM T button will have no effect. You can check the digital
zoom rate with the [X1.1 ~ X5.0] numerical mark next to the zoom
bar.
[ WIDE zoom ] [ Digital zoom 2.5X ] [ Digital zoom 5X ]
Pressing the
ZOOM T button
Pressing the
ZOOM T button
● WIDE Zoom
Digital zoom WIDE : When the digital zoom is in operation, pressing the ZOOM W button
will reduce the digital zooming in steps. Releasing ZOOM W button
stops digital zooming.
[ Digital zoom 5X ] [ Digital zoom 2.5X ] [ WIDE zoom ]
Pressing
the ZOOM
W button
Pressing
the ZOOM
W button
● To use the digital zoom the LCD monitor has to be turned on.
● Images taken using the digital zoom may take a little longer for the camera to process.
Allow time for this to take place.
● The digital zoom cannot be used in movie clip shots.
● You may notice a decrease in image quality when using the digital zoom.
INFORMATION
● If the menu is not displayed, this button works as the
DIGITAL ZOOM button.