Changing the recording mode : If the [STILL & MOVIE] menu was selected
Steps from 1-4 are the same as those for selecting the [MODE] menu.
5. The recording mode used just before will display.
6. Press the M (Mode) button located on the back of the camera and the recording mode will
change to the movie clip mode.
7. Press the M (Mode) button again and a still image mode selected on the [MODE SET]
menu will be selected.
Changing the recording mode : If the [FULL] menu was selected
Steps from 1-4 are the same as those for selecting the [MODE] menu.
5. The recording mode used just before will display.
6. Press the M (Mode) button located on the back of the camera and the mode selection
menu will display.
7. To select the Auto, Program, Movie clip or Scene modes, press the Left/ Right button.
To move between the Auto, Manual, Movie clip menu line and Scene menu line, press the
Up/ Down button.
8. Press the M (Mode) button and the mode selection menu will disappear.
Pressing the M (Mode) button
[AUTO mode]
[MOVIE CLIP mode]
Pressing the Up button
NIGHT
[Selecting the Scene mode]
Pressing the Left button
[Mode selection menu]
AUTO
MOVIE
[Selecting the Movie clip mode]
SET:OK/M
SET:OK/M
SET:OK/M
To Next Page
Loading...
