ŝ29Ş
E (Effect) button
Photo Frame
ƈ You can select one of 9 different 'frames' to add to a still image you want to capture.
1. Press the E button in the available camera modes
with the exception of Movie clip and Auto mode
and select the menu.
2. Select a desired sub menu by pressing the
Up/ Down button and press the OK button.
Photo Frame
3. The selected Photo Frame will appear. Press the shutter button to capture an
image
ſ Before taking a picture, you can change the frame type by pressing the +/- button.
Movie Clip frame stabiliser
Stabilizer
ƈ This function helps stabilize images captured during movie recording.
You can select this menu only in the MOVIE CLIP mode. If the memory card is
not inserted, this function will not operate.
1. Press the E button in the Movie clip mode and
select the menu.
2. Select a desired sub menu by pressing the
Up/ Down button and press the OK button.
: Movie clip frame stabilizer function is
disabled.
: Prevents camera shake during movie
recording. The recording frame range will
become narrower than when you select
the menu.
If the subject moves, the Pre-view frames
may be changed slightly.
To Next Page
Loading...
Need help?
General
