ŝ50Ş
PictBridge : Picture Selection
141-0001
Print: Menu:Ok
ȜȞ
ſ If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge
compatible printer to the camera through USB cable with [Connecting Computer]
message. By pressing the Printer button, at this point, you can connect the easy
printing mode with [Connecting Printer] message. In some instances the camera
may not connect to the printer, this will depend on the make of the printer.
ƈ Easy printing
When you connect the camera to printer in the Play
back mode, you can print a picture easily.
- Pressing the Printer ( ) button :
The currently displayed image will be printed with
the printer’s default setting.
- Pressing the Left/ Right button :
Selects a previous/ next image.
ƈ Select pictures to print
1. Press the Menu button.
2. The [Images] menu will appear.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
When [One Pic] is selected :
The PictBridge function will be applied only to the
picture currently displayed.
When [All Pics] is selected :
The PictBridge function will be applied to all pictures, excluding movie clips
and voice files.
IMAGES
One Pic
All Pics
Exit:MENU Move:
ƃ Setting the Number of Copies to Print
- Select [One Pic] or [All Pics]. A screen where you can set the number of copies
to print will appear as shown below.
- Press the Up/ Down button to select the number of prints.
- When [One Pic] is selected : Use the Left/ Right button to select another
picture. After selecting another picture, select the
number of prints for another picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number
of prints.
ƈ AUTO SET
1. Use the LEFT and RIGHT buttons to select the
[AUTO SET] menu tab.
2. Use the UP and DOWN buttons to select the
desired submenu value, and then press the OK
button.
[No] : [CUSTOM SET] values are kept.
[Yes] : All values in the [CUSTOM SET] are
automatically changed.
Exit:Shutter Set:OK
[When [One Pic] is selected]
PREV
NEXT
0
Exit:Shutter Set:OK
[When [All Pics] is selected]
0
AUTO SET
No
Yes
Exit:MENU Move:
To Next Page
Loading...
Need help?
General
