ŝ33Ş
Quality/ Frame rate Metering
ƃ If the subject is not the centre of the focus area, do not use the spot
metering as this may result in an exposure error. In this circumstance, It is
better to use exposure compensation.
INFORMATION
ƈ If you cannot obtain suitable exposure conditions, you can change the metering
method to take brighter pictures.
- Multi : Exposure will be calculated based on an
average of the available light in the image
area. However, the calculation will be
biased towards the centre of the image
area. This is suitable for general use.
- Spot : Only the rectangular area in the centre of
the LCD monitor will be metered for light.
This is the preferable setting when you want the subject in the centre of
the image exposed correctly, regardless of the back lighting.
METERING
Multi
Spot
ƃ This file format complies with the DCF(Design rule for Camera File system).
INFORMATION
ƈ You can select the compression ratio appropriate for your application of the
captured images. The higher the compression ratio, the lower the picture quality.
[STILL IMAGE mode] [MOVIE CLIP mode]
QUALITY
Super Fine
Fine
Normal
FRAME RATE
30 FPS
15 FPS
To Next Page
Loading...
Need help?
General
