ŝ77Ş
Setting up the application software
ƃ If you have installed the camera driver, The [Found New Hardware Wizard]
may not open.
ƃ On a Windows 98 or 98 SE system, the Found New Hardware Wizard
dialog box opens and a window asking you to select a driver file may
appear. In this case, specify "USB Driver" in the CD supplied.
INFORMATION
5. After restarting the computer, connect the PC to
the camera with the USB cable.
6. Turn the camera power on.
The [Found New Hardware Wizard] will open and
the computer will recognize the camera.
ſ If your OS is Windows XP, an image viewer program will open.
If the download window of Digmax Master opens after starting Digimax
Master, the camera driver was setup successfully.
To Next Page
Loading...
Need help?
General
