Ү If you connect the USB cable to a USB port on your PC and then turn on the power, the
camera will automatically switch to "computer connection mode".
Ү In this mode, you can download stored images to your PC through the USB cable.
Ү The LCD monitor is always turned off in PC mode.
Ү The camera status lamp will blink when the files are transferring via the USB connection.
Starting PC mode
ŝ127Ş
ƈ Connecting the camera to a PC
1. In any mode with the exception of Voice Recording
mode, press the Menu button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [USB] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Use the UP and DOWN buttons to select
[COMPUTER], and then press the OK button.
DATE&TIME
IMPRINT
AF LAMP
SOUND
USB
COMPUTER
PRINTER
SETUP
BACK: SET:OK
ſ If you selected [PRINTER] in Step 4, when you connect the camera to your printer, the
[CONNECTING PRINTER] message will display and the connection will not be established.
In this case, disconnect the USB cable, and then follow the procedure from Step 2 and
onward.
[Using the USB cable with Cradle]
[Using the USB cable with Camera]
To Next Page
Loading...
