ŝ63Ş
Save / Load a specific camera configuration (MySET)
ƈ Use the MySET mode to save frequently used camera settings (Save Myset) and use it later
(Load Myset)
ƃ Saving the camera configuration :
1. Use the camera buttons and menu to set desired camera
configuration.
2. Select the Program mode and press the Menu button.
3. Press the Left/Right buttons to select the [MYSET] menu tap.
4. Select the [SAVE] menu by pressing the Up / Down button
and press the Right button.
5. Press the Up/Down buttons to select desired MySET slot
number to save.
6. Press the OK button to save the current configuration.
ƃ Loading the saved camera configuration:
1. Select the Program mode and press the Menu button.
2. Press the Left/Right buttons to select the [MYSET] menu
tap.
3. Select the [LOAD] menu by pressing the Up / Down
button and press the Right button.
4. Press the Up/Down buttons to select desired MySET slot
number to load.
5. Press the OK button to set the camera configuration as
saved in the MySET slot.
* The current MySET slot number is displayed in the top left of the LCD.
ƃ Saving is available for the following camera functions.
Functions using the camera buttons - Macro, flash, white balance, ISO, RGB, Exposure
value, Aperture value and Shutter speed.
Functions using the menu screen - Size, quality, metering, effect, sharpness and
continuous shot.
INFORMATION
[ PROGRAM mode ]
[ PROGRAM mode ]
MYSET
SAVE
LOAD
MYSET1
MYSET2
MYSET3
MYSET
SAVE
LOAD
MYSET1
MYSET2
MYSET3
BACK: SET:OK
BACK: SET:OK
To Next Page
Loading...
