ŝ49Ş
ƈThis function helps stabiliser images captured during movie recording.
You can select this menu only in the MOVIE CLIP mode.
ƃHow to use this function
1. Press the E button in the Movie clip mode.
2. Select the STABIL. menu by pressing the Left/ Right
button.
3. Select a desired sub menu by pressing the Up/
Down button and press the OK button.
- : Movie clip frame stabiliser function becomes
disabled.
- : Prevents camera shake during movie recording.
The recording frame range will become narrower than when you select the
menu. Pre-view frames may not display smoothly on the LCD monitor.
ƃWhen you select the sub menu, the movie clip frame range will be narrow depending
on the movie clip size.
INFORMATION
Movie Clip frame stabiliser
To Next Page
Loading...
