ŝ22Ş
Flash ( ) / Left button
ƃ If you operate the Power button, Self-timer button, Shutter button or Play
mode button during the self-timer operation, the self-timer function is
cancelled.
ƃ Use a tripod to prevent the camera from shaking.
ƃ In Movie Clip mode, only the 10SEC self-timer will work.
ƃ Available flash mode, by recording mode (O : Selectable X : Not selectable) ƃ Selecting the self-timer
1. Select a RECORDING mode with the exception of
VOICE RECORDING mode. (p.13)
2. Press the SELF-TIMER button until the desired
mode indicator displays on the LCD monitor.
A 10 second, 2 second or double self-timer icon
appears on the LCD monitor. In Movie Clip mode,
only the 10-second self-timer will work.
Ү10SEC self-timer ( )
: Pressing the shutter button will allow an interval
of 10 seconds before the image is taken.
Ү2SEC self-timer ( )
: Pressing the shutter button will allow an interval
of 2 seconds before the image is taken.
ҮDouble self-timer ( )
: A picture will be taken after about 10 seconds and 2 seconds later a
second picture will be taken. When using the flash, the 2-second self-timer
may be delayed for longer than 2 seconds depending on the flash
charging time.
3. When you press the SHUTTER button, the picture will be taken after the
specified time has elapsed.
ƈ When the menu is displayed on the LCD monitor, pressing the Right button
makes the cursor shift to the right tab.
ƈ When the menu is not displayed on the LCD monitor, the RIGHT button
operates as the Self-timer ( ) button. This function is used when the
photographer would also like to be in the image.
INFORMATION
[Selecting the 10 SEC self-timer]
Self-timer ( ) / Right button
XXOXXXXXXXXXXO
XOOXOOXXXXXXX X
XXOXXXXXXXXOXX
XXOOXXXXXXXXXX
OOOOOOOOOOOXOX
To Next Page
Loading...
