EasyManua.ls Logo

Samsung DIGIMAX L60 - Before Contacting Service

Samsung DIGIMAX L60
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ŝ60Ş
Before contacting a service centre
ƈ Please check the following
The camera doesn’t switch on
ҮThere is low battery capacity
ƍ Insert fresh batteries. (p.9)
ҮThe battery may be inserted incorrectly.
ƍ Insert the battery according to the polarity marks (+, -)
ҮThe battery is not inserted
ƍ Insert the battery and turn on the camera
The camera power ceases while in use
ҮThe battery are exhausted
ƍ Insert charged battery
ҮThe Camera is turned off automatically
ƍ Turn on the camera power again.
Battery power quickly drains
ҮThe Camera is being used in low temperatures
ƍ Keep the camera in warm conditions (i.e. inside a coat or jacket) and only
remove it in order to take images
Camera does not take images when pressing the Shutter button
ҮThere is insufficient memory capacity
ƍ Delete unnecessary image files
ҮThe memory card has not been formatted
ƍ Format the memory card (p.54)
ҮThe memory card is exhausted
ƍ Insert a new memory card
ҮThe memory card is locked
ƍ Refer to [Card Locked!] error message
ҮThe camera’s power is off
ƍ Turn the camera power on
ҮThe battery is exhausted
ƍ Insert fresh batteries.
ҮBattery is inserted incorrectly with the polarities reversed
ƍ Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
ҮThe camera stopped due to a malfunction
ƍ Remove /re-insert battery and switch the camera on
The images are unclear
ҮA picture was taken without setting an appropriate macro mode
ƍ Select an appropriate macro mode to take a clear image.
ҮThe picture was taken with the subject beyond the flash range
ƍ Take a picture within the flash range
ҮThe lens is smudged or dirty
ƍ Clean the lens
The flash does not fire
ҮFlash off mode has been selected
ƍ Dis-engage flash off mode
ҮThe camera mode can’t use the flash
ƍ Refer to the FLASH instruction (p.20)
Incorrect date and time is displayed
ҮThe date and time have been set incorrectly or the camera has adopted the
default settings
ƍ Reset the date and time correctly
The camera buttons do not operate
ҮCamera malfunction
ƍ Remove / re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
ҮIncorrect memory card format
ƍ Re-format the memory card

Table of Contents

Related product manuals