Samsung DIGIMAX S1030 - Sound; Connecting an External Device (USB); Auto Focus Lamp; LCD Brightness

《58》
Setup menu
[ Sound ]
■ If you set sound to ON, various sounds will be activated for camera startup,
when buttons are pressed, so that you can be aware of the camera operation
status.
● [Sound] sub menu : Off / Low / Medium / High
[ Connecting an External Device (USB) ]
■ You can select an external device to which you want to connect the camera
using the USB cable.
● Sub menus
- [Computer] : Select this if you want to connect the
camera to your PC.
Refer to page 70 for instructions on
how to connect the camera to your
PC.
- [Printer] : Select this if you want to connect the
camera to your printer.
Refer to page 51 for instructions on
how to connect the camera to your
printer.
SETUP
Format
Date&Time
Imprint
Sound
USB
Back:  Set:OK
Computer
Printer
[ Auto Focus lamp ]
■ You can turn on and off the Auto Focus lamp.
● Sub menus
[Off] : The AF lamp will not light up in a low light
condition.
[On] : The AF lamp will light up in a low light
condition.
[ LCD brightness ]
■ You can adjust the LCD brightness.
● [LCD] sub menu : Dark, Normal, Bright
SETUP
Date&Time
Imprint
Sound
USB
AF Lamp
Back:  Set:OK
Off
On
SETUP
Imprint
Sound
USB
AF Lamp
LCD
Back:  Set:OK
Dark
Normal
Bright
SETUP
Language
Format
Date&Time
Imprint
Sound
Back:  Set:OK
Off
Low
Medium
High