《63》
Warning indicator
Before contacting a service centre
■There are several warnings that may appear on the LCD display
Card Error!
•Memory card error
→ Turn off the camera power and turn it on again
→ Insert the memory card again
→ Insert the memory card and format the memory card. (p.57)
Card Locked!
•The memory card is locked
→ SD memory card : Slide the write protect switch to the top of the memory card
Memory Full!
•There is insufficient memory capacity to take an image
→ Insert a new memory card
→ Delete unnecessary image files to free up some memory
No Image!
•There are no images stored on the memory
→ Take images
→ Insert a memory card that is holding some images
File Error!
•File error
→ Delete the erroneous files.
•Memory card error
→ Contact a camera service centre
Low Battery!
•There is low battery capacity
→ Insert fresh batteries.
Low Light!
•When taking pictures in dark places
→ Take pictures in Flash Photography mode.
Out Of Number
•When selecting too many printing pages in the PictBridge menu.
→ Select printing page within the limitation.
DCF Full Error
•Violation of DCF format
→ Copy the images to a PC and format the memory.
The camera doesn’t switch on
•There is low battery capacity
→ Insert fresh batteries. (p.9)
•The battery may be inserted incorrectly.
→ Insert the battery according to the polarity marks (+, -)
•The battery is not inserted
→ Insert the battery and turn on the camera
■ Please check the following
To Next Page
Loading...
