Samsung Digimax S500 - Page 103

104
Ⅶ.TROUBLESHOOTING
5) Defect related to the LCD
When the camera is connected to the external
monitor, images are displayed correctly
Check the connection of LCD F PCB
When the LCD is pressed, the camera is
turned off
Check the defect of CCD
① Images are not displayed on the LCD - Check the connection
② The LCD is whitened - Check the short of F PCB pattern
③ Interference of MAIN PCB and CF_41
- Check the location of tape on the bakc of the LCD
④ Check the protect tape of BACK LIGHT soldering
⑤ Check the soldering condition of BACK LIGHT
Defect of BACK LIGHT
NO
YES
⑤ Check the
soldering condition
of BACK LIGHT
④ Check the protect
tape of BACK
LIGHT soldering
CF_41