57
Ⅳ.ADJUSTMENT
5. How to update the FIRMWARE
1. Visit our web site 'www.samsungcamera.com/service' and download the firmware (for S500 download
"STS253.elf" and for S600 download "STS263.elf") in the temporary folder.
2. Insert the SD card that has the firmware to the camera and turn on the camera.
Then, select the Voice recording mode by doing the same way as firmware version check.
3. Press the buttons in the same way as firmware version check and the firmware will be updated.
When the update is progressing, AF lamp will be blinking.
4. When the camera turns off if the update is completed, remove the SD card and check the firmware.
※ When doing the firmware update, use the AC adapter. If the camera turns off while updating, the
camera couldnot work. After updating firmware, reset the camera.
1
2
4
FW VER : 5121990654.1509
DEBUG PV2
FAST BOOT
3
To Next Page
Loading...
