15
Ⅱ.INSTALLATION&FAQ
3. After restarting the computer, connect the PC to the camera with the USB cable.
● If you have installed the camera driver, The [Found New Hardware Wizard] may not open.
● On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and a window
asking you to select a driver file may appear. In this case, specify "USB Driver" in the CD supplied. (for
Windows 98 and 98 SE).
4. Turn the camera power on.
The [Found New Hardware Wizard] will open and
the computer will recognize the camera.
※ If your OS is Windows XP, an image viewer
program will open.
If the download window of Digmax Master
opens after starting Digimax Master, the camera
driver was setup successfully.
To Next Page
Loading...
