Samsung Digimax S500 - Digital Camera Repair Checklist

42
Ⅳ.ADJUSTMENT
4) Check list for Digital camera repair
To check the digital camera functions before/after repairing, refer to the check list.
1- Check the scratch, stain, misprint.
- Check whether the screws are turned firmly.
- Check the corrosion of terminal, bad exterior.
- Do chemical and glue test to the printing/ painting parts.
2 Insert the adapter. - Check the connecting and contact condition.
3- Insert the batteries with the correct polarity and check the contact
condition.
- Check whether the cover is opened easily after closing.
4- The card can be inserted or removed easily and cover is closed
firmly.
-
Do inserting and removing card(SD/MMC) test two times.
→ The card must be inserted firmly and has not to spring out.
- Insert the card/batteries and give a little impact on the camera.
The camera must recognize the card and “CARD LOCKED”
message has not to be displayed.
5- When the cable is inserted, check whether the
images play back on the external monitor.
6- Check whether the green LED is blinking, SAMSUNG LOGO is on
and the start-up sound sounds.
- Check the “L” and “FINE” icon on the LCD monitor.
- Check whether the AE function is correct at the low light and high
light condition.
- Check whether the “beep” sounds on the recording and movie clip
mode.
→ The “beep”can be sounded in the microphone part.
Check that in a quiet room.
7- Press the zoom W/T button with the viewfinder.
→ Check dust and percentage of the frame seen, zoom rate.
- Press the zoom W/T button with the TFT-LCD monitor.
→ Check the zoom rate and whether the zoom bar moves smoothly.
8- Check whether the Macro icon(Flower) is displayed on the LCD
monitor.
- Check the AF in the Macro focus with the TFT-LCD monitor.
9- Check whether the subject captured from 2M has over or under
exposure and the fucus is clear.
Check the exterior of a camera.
Check the battery cover.
Check the card condition after
inserting the card.
Insert the Video cable.
Turn on the camera.
Press the zoom W/T button.
Macro focus.
Normal focus.
No. Checking item Check point