33
Connection Using an IR Stereo Cable (sold
separately)
―
The DM65E-BR and DM75E-BR models do not support the IR OUT port.
Make sure to connect the External ambient sensor while the product is powered
off. Then, power on the product.
Controlling more than one display product using
your remote control
•
Connect the IR OUT port on the product to the IR / AMBIENT SENSOR IN
port on the other display product using the dedicated stereo cable.
•
A command sent from the remote control pointed at product
1
will be
received by both display products
1
and
2
.
―
The appearance may differ depending on the product.
1 2
IR OUT IR / AMBIENT
SENSOR IN
Controlling more than one display product using an
External ambient sensor
•
A command sent from the remote control pointed at product
1
(to which
the External ambient sensor is connected) will be received by both display
products
1
and
2
.
―
The appearance may differ depending on the product.
IR OUT IR / AMBIENT
SENSOR IN
IR / AMBIENT
SENSOR IN
1 2
To Next Page
Loading...
