START/RESET
Press this button to start the selected program.
When the door is opened while the dishwasher is operating, the Pause
function is activated.
When the Pause function is activated, only the Power button works.
To deactivate the Pause function, close the door.
If you want to reset the selected program, press the Start/Reset button for 3
seconds.
POWER
When pressed, all indicator lights turn on and off and the most recently
finished program light is lit.
When the dishwasher is running and a selected program has finished, ‘En’ is
displayed and the power turns off automatically.
• A wash program must be selected only before starting an operation, and the selected program can not
be changed during an operation.
• If you want to change the program after starting an operation, press the Start/Reset button for 3
seconds to reset the selected program and then change the program.
To Next Page
Loading...
