setting up your dishwasher
ADJUSTING THE LEVEL
Unfasten the adjusting nuts of the legs.
Rotate the legs to adjust the height.
If the ground surface is too uneven, please contact a qualified
service technician.
FREESTANDING TYPE INSTALLATION
1. Connect the power cord after the dishwasher is installed.
2. Do not repair, replace, or fix the part yourself. Disassembling, repairing or modifying the product is
only permitted by an authorized service technician.
3. This dishwasher is intended for domestic use only.
4. Turn off the water supply before installing the dishwasher.
5. Please to read the reference section before installing the dishwasher.
Tools
Electric Screwdriver Adjustable wrench
Accessories
a. Pinthfacia Lower Rubber (Protective panel)
1 pcs (598 x 30)
(Model: DMS500TR)
b. PU Foam Tape 1 pcs (600 x 10 x 5)
(Model: DMS500TR)
c. Screws – TRS (4 x 12) 3 pcs d. Cable Clamp 3 pcs e. Cable Tie 2 pcs
Higher
Leveler
Lower
WARNING
To Next Page
Loading...
