Samsung DS-5014D - Page 7

2-Line LCD Phones
(DS-5014D/5021D & ITP-5014D/5021D)
48 CHARACTER DISPLAY
PROGRAMMABLE BUTTONS
SOFT KEYS (3)
Used to activate
features via the
display
SCROLL KEY
Used to select start
menu and scroll through
display options
With tri-coloured LEDs:
BUTTONS
REDIAL BUTTON
SPEAKER
For hands-free operation.
Used in place of handset
Volume control for hand-
set, ring, speaker, etc
CONFERENCE = Set up a conference call HOLD = Hold calls
with up to four others REDIAL = Last number redial
TRANSFER = Transfer current call (or enter SPEAKER = Switch on speakerphone
QUICK REFERENCE GUIDE
VOLUME CONTROL
The programmable buttons above the keypad are arranged in rows of 2x7 (14) buttons or
+
keys 1 and 2 are set as CALL keys. CALL keys flash for incoming calls.
3x7 (21 buttons) and are numbered from 1 to14 or 21 from top left to bottom right. By default,
5014D keyset has 14
5021D keyset has 21
TRANSFER BUTTON
SPEAKER BUTTON
HOLD BUTTON
CONFERENCE BUTTON
MICROPHONE
NAVIGATION BUTTONS
STATUS INDICATOR LED
Shows the current status of
the keyset (busy, message
Navigation buttons comprise SEND, MENU, CANCEL, END, ENTER and direction (arrow)
buttons. They are used to navigate through features and menus on the display.
MMC programming mode)
For navigating through
LCD menus and features
QUICK REFERENCE GUIDE QUICK REFERENCE GUIDE
waiting, etc.)
2 x 24-character lines
QUICK REFERENCE GUIDE
ENGLISH
ENGLISH