To Next Page
E
Elizabeth LittleSep 12, 2025
What to do if my Samsung Air Conditioner has an indoor fan error?
- MMaureen CabreraSep 12, 2025
If your Samsung Air Conditioner is showing an indoor fan error, the suggested solution is E154.
What to do if my Samsung Air Conditioner has an indoor fan error?
If your Samsung Air Conditioner is showing an indoor fan error, the suggested solution is E154.
What to do if my Samsung Air Conditioner has an error on the Eva-in, Eva-out, or Discharge sensor?
If your Samsung Air Conditioner shows an error on the Eva-in sensor (Short or Open), an error on the Eva-out sensor (Short or Open), or a Discharge sensor error (Short or Open), the suggested solutions are E122, E123, and E126.
General| Type | Duct Type |
|---|---|
| Refrigerant | R410A |
| Power Source | 220-240V, 50Hz |
| Control Type | Remote Control |
| Airflow Control | Auto, Manual |
| Optional Features | Wi-Fi Control |
| Noise Level | 45 dB |
| Air Flow Rate | 1, 200 m³/h |
Provides comfort during hot summer days.
Highlights energy efficiency and year-round heating/cooling capability.
Describes slim design and adaptable air intake for varied installations.
Covers symbols, power, location, and floor safety for installation.
Details risks during operation, handling, special usage, and safe cleaning methods.
Lists operational temperature/humidity ranges and unit protection features.
Provides tips for efficient cooling, heating, and de-icing operations.
Explains unit behavior during power outages and compressor protection.
Shows diagrams of MA1 and MA2 duct type indoor units.
Step-by-step instructions for cleaning the air filter for optimal performance.
Outlines recommended maintenance tasks for monthly, quarterly, and yearly intervals.
Explains common errors indicated by LED displays on the unit.
Lists error codes displayed on the wired remote control and their respective solutions.
Covers safety during installation and preparation steps for the unit.
Details mounting, anchoring, leveling, and connecting the indoor unit.
Guides on connecting pipes, cutting, flaring, leak testing, and drainpipe setup.
Covers connecting the power cord, wiring, and adjusting air flow settings.
Explains how to set indoor unit option codes, addresses, and installation configurations.
