Installation
Installation
English18
SBI (Semi Built-In, DW60M9***S*) models
12. While holding the custom panel, attach
it to the door and insert the custom
panel xers (B) into the corresponding
holes near the bottom of the door as
shown.
13. Push the custom panel upward to x.
14. Open the dishwasher door and remove
the 2 screws.
CAUTION
Use caution when opening the door. The
door might open or close unexpectedly
if the spring level is not adjusted
appropriately, resulting in physical injury.
DW9000M_DD68-00193B-02_EN.indd 18 2018-04-10 12:58:54
To Next Page
Loading...
