Installation
English 19
SBI (Semi Built-In, DW60M9***S*) models
15. Secure the custom panel to the door by
fastening the 4 screws (Ø4 X 43).
12345
30˚
16. Refer to the table below and adjust the
spring level by turning the spring screw
with Torx T20 screwdriver on the front
of the dishwasher.
• Adjust the spring level while the door is
approximately opened at 30 degrees.
• The door should hold its position. It
should not fall open.
CAUTION
Do not adjust the spring level while the
door is completely opened.
Recommended spring levels
Level Weight of the custom panel (kg)
Level 1-2 2-5
Level 2-3 5-6
Level 3-4 6-7
Level 4-5 7-9
CAUTION
If the custom panel weighs more than 9 kg, the door may fall open. Custom panels
weighing more than 9 kg are not recommended.
DW9000M_DD68-00193B-02_EN.indd 19 2018-04-10 12:58:55
To Next Page
Loading...
