Installation
Installation
English24
To the sides
1. Use a at-head screwdriver to remove
the middle and bottom caps from both
sides of the dishwasher.
CAUTION
Do not remove the top caps on both sides
of the dishwasher.
2. Tighten the 4 screws (Ø4 X 12).
3. Reinsert the caps in their original
position.
4. Connect the water hose, but do not
open the water tap until installation is
complete.
DW9000M_DD68-00193B-02_EN.indd 24 2018-04-10 12:58:56
To Next Page
Loading...
