Installation
English 25
STEP 8 Connect the drain hose
1. Detach the hose holder from the
dishwasher, and then cut off the
protruding part from the holder as
shown.
2. Fix the holder to a wall by tightening
the 2 screws (Ø4 X 12).
Max. 80 cm
3. Insert the drain hose into the holder so
that the drain hose is positioned 30 cm
to 80 cm from the bottom.
Max. 80 cm
Min. 30 cm
4. Connect the drain hose to the drain
outlet.
CAUTION
• Install the drain system properly so that
the drain hose does not come out of the
drain outlet in the draining process.
• Make sure that the drain hose, supply
hose, and power cord is not kinked or
folded.
DW9000M_DD68-00193B-02_EN.indd 25 2018-04-10 12:58:56
To Next Page
Loading...
