To Next PageTo Next PageWhat to do if water won’t pump out of my Samsung DW80R2031US?
If water won’t pump out of your Samsung dishwasher, the drain may be clogged. Contact a qualified service technician to remove any obstruction from the drain hose and check the drain pump operation.
Why is my Samsung DW80R2031US taking so long to wash?
If your Samsung Dishwasher is taking too long to complete a cycle, it might be due to the water supply being cold. Ensure the water supply line is connected to a hot water supply. The dishwasher needs extra time to heat cold water.
Why Samsung DW80R2031US not heating up?
If your Samsung Dishwasher isn't reaching the expected temperature after 60 minutes of heating, several factors could be responsible. The heater itself might be faulty and need replacement. The thermistor could be malfunctioning, requiring inspection or replacement. Other potential causes include problems with the Main PBA, a failure in the case brake to detect the pulse, a malfunctioning water valve, a broken overflow sensor, or a water leakage. Check for and resolve any water leakage.
What to do if the non-water switch doesn't work on my Samsung DW80R2031US Dishwasher?
If the non-water switch isn't working during the pre-wash phase of your Samsung Dishwasher, it could be due to several reasons. First, check if the water supply pressure is low and ensure the water supply valve is open. If these are fine, the non-water switch itself might be broken and need replacing. Also, the wash pump might not be working, or there could be issues with the Main PBA. Inspect or replace the Main PBA.
What to do if the high-water float switch is activated repeatedly on a Samsung Dishwasher?
If the high-water float switch in your Samsung Dishwasher is activated for 5 seconds, five times in a row, it could mean the switch itself is broken and needs replacement. Another possibility is that the water valve is stuck open and cannot be closed; check and resolve any issues with the water valve. Additionally, there might be problems with the Main PBA, so inspect or replace it if necessary.
What causes an open-circuit failure in the thermistor of a Samsung DW80R2031US?
An open-circuit failure in the thermistor of your Samsung Dishwasher typically indicates that the thermistor is broken and needs replacement. It could also be due to the main PBA failing to detect the pulse, in which case you should inspect or replace the Main PBA.
General| Type | Built-In |
|---|---|
| Color | Stainless Steel |
| Number of Wash Cycles | 5 |
| Noise Level | 55 dBA |
| Capacity | 14 Place Settings |
| Energy Star Certified | Yes |
| Soil Sensor | Yes |
| Delay Start | Yes |
| Third Rack | No |
| Stainless Steel Interior | Yes |
| Heated Dry | Yes |
| Water Consumption | 3.5 gallons |
| Control Type | Touch |
