Why is my Samsung DW80R5061UG/AA not draining?
Your Samsung Dishwasher might not be draining due to several reasons. A foreign object may have entered and blocked the drain pump, in which case you should remove the object. Alternatively, the drain pump itself, the Main PBA, or the Inverter PBA could be out of order, requiring repair or replacement.
What to do if my Samsung DW80R5061UG/AA Dishwasher is not filling with water?
If your Samsung Dishwasher isn't filling with water, it could be due to several reasons. The water supply pressure may be too low, so turn on the water supply valve. The water supply valve might be closed, so open it. The aqua stop could be faulty and may need checking or replacing. Finally, the case brake might not be detecting the pulse correctly, so check its functionality.
How to fix Samsung DW80R5061UG/AA when temperature sensor data is out of range?
If the temperature sensor data output is too high (equal to or greater than approximately 4.5V) or too low (equal to or less than approximately 0.2V) on your Samsung Dishwasher, the thermistor is likely out of order and needs to be replaced.
What to do if Samsung DW80R5061UG/AA synchronous motor location is not detected?
If the location is not detected for 2 minutes after the synchronous motor operation in your Samsung Dishwasher, it could be due to the synchronous motor being out of order, in which case you should repair or replace it. Another possibility is that the location in the cam is incorrect, and you should adjust it.
Instructions for service engineers to prevent accidents and hazards during servicing.
Details the key features of the dishwasher, such as capacity and quiet operation.
Outlines the technical specifications of the dishwasher model.
Compares features and specifications with older models.
Lists optional accessories and their specifications.
Lists necessary tools for disassembly and reassembly procedures.
Provides standard disassembly drawings and safety precautions.
Outlines preparation steps and error code checks for troubleshooting.
Explains how to use the service inspection and auto modes.
Details the components and connectors on the Main PBA.
Lists relays and connectors on the Main PBA.
Shows the layout and pin assignments for PCB connectors.
Illustrates PCB connectors and their pin functions.
Provides the schematic for the dishwasher's wiring connections.
Explains the naming convention for Samsung dishwasher models.
Defines key terms and components used in the manual.
General| Style | built-in dishwashers |
|---|---|
| Color | black stainless steel |
| Load Capacity | 15 |
| Number of Cycles | 6 |
| Cycle Selections | auto, normal, heavy, delicate, express 60, rinse only |
| Options/Settings | half-load wash (lower rack), stormwash, hi-temp wash, sanitize (anti-bacterial - nsf), delay start, control lock |
| Drying Type | condenser drying |
| Noise level | 48 decibels adjusted |
| Control Type | touchpad |
| Delay Start | yes |
| Child Lock | yes |
| Number of Racks | 3 |
| Cycle Signal | yes |
| Food Disposer | no |
| Sanitize Settings | yes |
| Wi-Fi | none |
| Smart Home | no |
| Annual Energy Consumption | 265 kilowatt hours |
| Water Consumption Per Cycle | 3.5 gallons |
| Voltage | 120 volts |
| Current | 15 amperes |
Weight and Dimensions| Depth | 24 5/8 inches |
|---|---|
| Height | 33 7/8 inches |
| Width | 23 7/8 inches |
| Net Weight | 95 pounds |
To Next Page