30
or an account number when you call an automated
system, like a banking service.
• <Service provider> Menu:
Lets you choose a
Roam/Intl setting.
• End call
: Allows you to end the active call.
2. If you are engaged in a call, you can place
the active call on hold by selecting the
New
call
option and either dialing another number
or answering another incoming call. Once
the second call is activated, the following
options are available:
•Swap
: Places the active call on hold and then
re-activates the call on hold.
•Join
: Joins two calls (both active and on hold)
into a multi-party call.
Using the Speakerphone During an Active
Call
While in an active call, it is possible to enable the
speakerphone feature.
1. Dial the number and press .
2. Press to activate the speakerphone.
3. Press the
Volume
keys (located on the left
side of your phone) to adjust the volume.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s
microphone off, so that the other person cannot
hear you.
Example:
You wish to say something to person in the room,
but do not want the person on the phone to hear
you.
To Next Page
Loading...
