Samsung Evergreen - Call Waiting and Multi-Party Calling

Call Functions 35
• Total sent : shows the size of the total data
packet (measured in KB - kilobytes) which were
sent by the phone since the last time this counter
was reset.
• Total received : shows the size of the total data
packet (measured in KB - kilobytes) which were
received by the phone since the last time this
counter was reset.
2. Press Reset to set the counters to zero.
3. Enter the password and press Confirm to
reset all counters. For more information,
refer to “Change Phone Password” on
page 118.
Call Waiting
The Call Waiting feature allows you to answer an
incoming call while you have a call in progress, if
this service is supported by the network, and you
have set the Menu Settings Call s  Voice
Call  Call Waiting menu to Activated. You are
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press to answer the next incoming call.
The first call is automatically placed on hold.
2. To switch between the two calls, press
Options Swap.
Swap places the current call on hold and
then activates the previous call.
3-Way Calling (Multi-Party Calling)
The 3-Way or Multi-Party feature allows you to
answer multiple incoming calls and place them on
hold. If this service is supported by the network,
you can join the calls together into a multi-party
call. A call waiting tone notifies you of an incoming
call.