86
Timer
You can use this menu to set a countdown timer.
Use a timer to count down to an event based on a
preset time length (hours, minutes, and seconds).
1. Press
Menu
Tools
Timer
.
2.
Press
Set
and use the keypad to enter a
countdown time length for the alert by setting
the Hours, Minutes, and Seconds value then
press the
OK
soft key.
3.
Press the key to begin the timer.
4.
Press the key twice to pause the timer.
Stopwatch
You can use this menu to measure intervals of
time.
1. Press
Menu
Tools
Stopwatch
2.
Press
Start
to start the counter.
3.
Press
Lap
to measure lap time,
Stop
to stop
the stopwatch. You can record multiple lap
times.
4.
Press
Reset
to erase all times recorded.
<Service Provider> Menu
You can use this menu to set the Roam/INTL
setting (INTL 1 or INTL 2).
1. Press
Menu
Tools
<Service provider>
Menu
Roam/INTL.
2.
Highlight
INTL 1
or
INTL 2
and press
Select
or
.
To Next Page
