Samsung Executive MOBEX - Group Call Pickup; Group Numbers; Dialing Features; Speed Dialing

GROUP CALL PICKUP
To pick up (answer) a call ringing in any pickup group:
•Dial 66 plus the desired group number.
GROUP NUMBERS
01-10 OfficeServ 7030
01-20 OfficeServ 7100 and OfficeServ 7200-S
01-99 OfficeServ 7200 and OfficeServ 7400
NOTE: Station and group pickup features cannot be used to answer re calls to a sta-
tion, only new ringing calls and operator recalls.
10
Mobex_User_Guide_SLT_screen.qxd 4/13/2011 10:54 AM Page 17
11
DIALING FEATURES
SPEED DIALING
You can dial a preprogrammed telephone number stored in the system-wide
speed dial list of numbers 500–999 or from your personal list of num bers 00–49.
•Dial 16.
• Dial the desired speed dial number.
•The telephone number is automatically dialed for you.
NOTE: Your system may be set for 950 system wide numbers. If so the system speed
dial access codes are 050~999 and the station speed dial codes are 000~049.
PROGRAMMING PERSONAL
SPEED DIAL NUMBERS
To program personal speed dial numbers:
•Dial 15105 the next available speed dial bin number (e.g. 01), a trunk or
trunk group number and your speed dial digits.
•Hang up.
NOTE: It is much easier to have your System Administrator program these for you.
LAST NUMBER REDIAL
To redial the last telephone number you have dialed:
•Dial 19.
NOTE: Redial does not apply to intercom calls.
Mobex_User_Guide_SLT_screen.qxd 4/13/2011 10:54 AM Page 18