Samsung F-AR12FSSSCWK1 - Page 47

English-47
INSTALLATION07
10. Connect the grounding conductor to the grounding terminals.
11. Close the terminal board cover by tightening the screw carefully.
• InRussiaandEurope,consultwiththesupplyauthoritytodeterminethesupplysystemimpedancebefore
installation.
• Connectthewiresrmlysothatwirescannotbepulledouteasily.
(If they are loose, it could cause burn-out of the wires.)
• Connectthewiresaccordingtocolorcodes,referringtothewiringdiagram.
• Thepowercableandtheinterconnectioncableshouldbeselectedaccordingtothespecicationinpage45.
DRED wiring diagram
COMMON
DRM3
DRM2
DRM1
ASSY Control out
DRED SUB PBA
DRED Controller
Outdoor unit
A3050 Australia_IB&IM_DB68-05206A_EN.indd 47 2014/12/29 19:07:39